Cisco Cisco StadiumVision Director Manual De Mantenimiento
© 2011 Cisco Systems, Inc. All rights reserved.
Page 50 of 103
DMPs complete the reboot sequence and notify the Dashboard via the registration
request.
request.
DMP States During Provisioning
While a DMP is being provisioned, it transitions through three states:
Not Ready -> Ready -> Production
•
Not Ready: The DMP is registered in Cisco StadiumVision Director but has
not been provisioned.
•
Ready: The DMP is provisioned in Cisco StadiumVision Director but has not
been assigned to a Location. Note that all scripting is done on Locations and
not on DMPs.
not on DMPs.
•
In Production: The DMP is registered, provisioned and assigned to a
Location in Cisco StadiumVision Director.
As the DMP transitions through these states, you can view the progress on the
Management Dashboard and Control Panel. See
Management Dashboard and Control Panel. See
Manually Executing the Provision DMP Command
As an alternative to using auto-provisioning, you can manually execute the
Provision DMP operation to provision one or more DMPs. This operation is
executed from the Dashboard just like any of the other Dashboard commands.
Provision DMP operation to provision one or more DMPs. This operation is
executed from the Dashboard just like any of the other Dashboard commands.
The Provision DMP command performs 3 different operations, depending on the
parameter with which it is invoked:
parameter with which it is invoked:
1. Execute Provision DMP command
Select Provision DMP command. Select "Execute" in the operation drop
down in the command arguments panel (default). Then select DMPs and
press Play.
down in the command arguments panel (default). Then select DMPs and
press Play.
2. Cancel Provision DMP command
Select Provision DMP command. Select "Cancel" in the operation drop down
in the command arguments panel. Then select DMPs and press Play.
in the command arguments panel. Then select DMPs and press Play.
3. View status of Provision DMP command
Select Provision DMP command. Select "Query" in the operation drop down
in the command arguments panel. Select DMPs. Press Play. The status is
displayed in the Console tab of the DMP. Select a DMP and view the status
of the Provision DMP command in the console tab.
in the command arguments panel. Select DMPs. Press Play. The status is
displayed in the Console tab of the DMP. Select a DMP and view the status
of the Provision DMP command in the console tab.