Cisco Cisco StadiumVision Mobile Manual De Mantenimiento
© 2011 Cisco Systems, Inc. All rights reserved.
Page 28 of 83
It requires that all phones are associated to a single user in CUCM.
It requires that the Settings button on the IP Phones be enabled whenever it is
invoked (security risk), this requires a phone reset
It requires that the phone be enabled to “allow end user changing of the
backgrounds”
backgrounds”
It requires that the IP Phone be in a specific state at the time of launch or it may
not work (must be on call services display, if left on Directory or Settings it may
not work)
not work)
It uses simulated key presses to execute the background change, which is
invasive as each press is visible on the phone as it is being executed
It is not capable of pushing different images to different groups of phones (ie:
stadium background on office phones versus event background on suite
phones), it will either push to all phones at once or one at a time
phones), it will either push to all phones at once or one at a time
It is suitable only for a one-time initial bulk deployment but not scalable beyond
that due to the settings changes that would be required on the phones for each
push (enable settings in cucm, push graphic, disable settings- this results in
multiple resets to the phone)
push (enable settings in cucm, push graphic, disable settings- this results in
multiple resets to the phone)
There is no error reporting thus no way of knowing that the background was
applied to a specific phone
As an alternative, you can use a third-party application called VoIP Integration
Background Deployer for bulk background deployment. Further information on this
application is documented in the
Background Deployer for bulk background deployment. Further information on this
application is documented in the
16B
Enabling IP Phones for Local TV Control
After the Cisco IP Phone and CUCM have been installed and are operational, to
enable the Cisco IP Phone to act as local control for a designated area (such as a
luxury suite) do the following:
enable the Cisco IP Phone to act as local control for a designated area (such as a
luxury suite) do the following:
Step
For instructions, see
On CUCM:
Configure Cisco StadiumVision services for the IP
Phone
Phone
Configure any speed dials
Configure the IP Phone display:
- For luxury suites, set the display of the IP Phone to
the Cisco StadiumVision Services home page
- For administrative areas, the display should be left
as default
Load the Cisco StadiumVision background graphic.
CUCM Configuration
On Cisco StadiumVision Director:
Identify the CUCM server
Configure the TabSynch User password (for
speeddials)
speeddials)
Define the IP Phone as a control device and specify
whether it is used in a luxury suite environment (both
whether it is used in a luxury suite environment (both
Cisco StadiumVision Director
Configuration
Configuration