Cisco Cisco RF Gateway 1 Notas de publicación
2
4028087 Rev B
Overview
Safe Operation for Software Controlling Optical Transmission
Equipment
If this document discusses software, the software described is used to monitor
and/or control ours and other vendors' electrical and optical equipment designed
to transmit video, voice, or data signals. Certain safety precautions should be
observed when operating equipment of this nature.
For equipment specific safety requirements, refer to the appropriate section of the
For equipment specific safety requirements, refer to the appropriate section of the
equipment documentation.
For safe operation of this software, refer to the following warnings.
For safe operation of this software, refer to the following warnings.
WARNINGS:
Ensure that all optical connections are complete or terminated before using
this equipment to remotely control a laser device. An optical or laser device
can pose a hazard to remotely located personnel when operated without
their knowledge.
Allow only personnel trained in laser safety to operate this software.
Otherwise, injuries to personnel may occur.
Restrict access of this software to authorized personnel only.
Install this software in equipment that is located in a restricted access area.
In This Document
DTI Timing Offset ....................................................................................................... 4
For Information ........................................................................................................... 5