Cisco Cisco StadiumVision Mobile Guía De Instalación Rápida
l
You can use different forms of local control only when using HDMI-In encoding to
stream video as a multicast channel. Otherwise, you need to use scripts to
start/stop streaming.
l
If you want to maintain privacy of channels, create a DMP-encoded channel per
suite with a unique multicast address (from 239.193.20.0/24 range), and create a
separate channel guide per suite.
For example, if you have 10 suites—create 10 separate DMP-encoded channels
with unique multicast addresses, create 10 different channel guides for each
DMP-encoded channel, and assign each suite to a different channel guide.
Prerequisites for Using HDMI-In on the SV-4K
Before you use HDMI-In on the SV-4K, be sure that the following conditions are met:
l
You have purchased a separate encoder software license. For more information,
l
Test the devices that you plan to connect to the SV-4K HDMI-In port to stream
content for HDCP support.
Most Mac OS and Windows laptops should work for HDMI-In video encoding for
non-copy-protected content. It is up to the device manufacturer and OS whether or
not this is supported.
l
When using HDMI-In encoded video channels, be sure that you have configured
the allowable multicast range 239.193.20.0/24 for this feature in the Connected
Stadium network.
© Cisco Systems, Inc. All rights reserved.
139 of 331