Cisco Cisco StadiumVision Director Guía De Instalación Rápida
IMPORTANT: If for some reason you needed to restore the SV-
4K operation to a new Cisco StadiumVision Director server (not a
failover operation), then you would need to change the DHCP
server option 43, reconfigure the new server for auto-provisioning
of the SV-4K, and reboot the SV-4K devices similar to a new
deployment of the SV-4K devices. For more information, see the
.
Replacing a Failed Media Player While an Event
Script is Running
Script is Running
This task describes the steps to replace a failed media player with a new device that
continues to follow the same script.
After replacement, the new media player should:
l
Belong to the same groups and zones.
l
Respond to the zone/group state actions.
l
Display the same content as the media player it replaces.
To replace a failed media player while an event script is running, complete the
following steps:
following steps:
1. Unplug the failed device and replace it with a new device.
2. Wait until auto-registration and provisioning completes, and the new device
appears in the Management Dashboard.
3. From Control Panel > Setup > Zones & Groups, un-map the failed device from
its Location, and map the new device to this Location.
4. From Control Panel > Control, manually stage content to the new device.
5. (For SV-4K only) From the Management Dashboard, go to:
d. DMP and TV Controls > DMP Commands
e. Run the Restart Runtime command for the new SV-4K device only.
6. Verify that the new device is showing the expected content.
316 of 331
© Cisco Systems, Inc. All rights reserved.