Cisco Cisco StadiumVision Mobile Reporter Manual De Mantenimiento
© 2011 Cisco Systems, Inc. All rights reserved.
Page 20 of 94
When deciding whether to use Velcro to mount the DMP directly to the TV, consider
how much room there will be to maneuver behind the TV and also how much air
space there will be around the DMP. It is difficult to re-attach a DMP to Velcro on
the rear of a TV in tight-fitting installations. Also, heat generated by the TV can
soften the Velcro adhesive thus reducing the effectiveness of the bond. If the Velcro
is not securely adhered to the DMP, it may pull away from the rear of the TV when
you remove the DMP.
how much room there will be to maneuver behind the TV and also how much air
space there will be around the DMP. It is difficult to re-attach a DMP to Velcro on
the rear of a TV in tight-fitting installations. Also, heat generated by the TV can
soften the Velcro adhesive thus reducing the effectiveness of the bond. If the Velcro
is not securely adhered to the DMP, it may pull away from the rear of the TV when
you remove the DMP.
Care must be taken to use the appropriate adhesive and to properly prepare the
plastic surfaces to insure a tight Velcro bond. Due to the plastic composition, the
appropriate adhesive depends on the TV model. The following 3M
plastic surfaces to insure a tight Velcro bond. Due to the plastic composition, the
appropriate adhesive depends on the TV model. The following 3M
Dual Lock™
Reclosable Fasteners have proven to be effective:
SJ3551 (Type 400)
SJ3552 (Type 170)
SJ3550 (Type 250)
These fasteners have a 37 mil white conformable acrylic foam adhesive providing
good contact with substrates having a slight texture or surface irregularities. The
adhesive is protected with a clear silicone treated liner allowing easy removal from
the adhesive.
good contact with substrates having a slight texture or surface irregularities. The
adhesive is protected with a clear silicone treated liner allowing easy removal from
the adhesive.
Many times with molded plastic parts, such as the TV monitors, there is a mould
release agent used during the molding process. If that mould release agent is not
wiped with a cleaning solution such as a 50/50 solution of isopropyl alcohol and
water that 3M suggest, the plastic surface could be contaminated. Of course, this
would affect adhesion.
release agent used during the molding process. If that mould release agent is not
wiped with a cleaning solution such as a 50/50 solution of isopropyl alcohol and
water that 3M suggest, the plastic surface could be contaminated. Of course, this
would affect adhesion.
After cleaning the surface, it is suggested that you use 15 psi pressure for proper
bonding and allow for a 24 hour curing period before mounting the DMP. Refer to
the technical data brochure that is shipped with the 3M Velcro fasteners for proper
attachment techniques.
bonding and allow for a 24 hour curing period before mounting the DMP. Refer to
the technical data brochure that is shipped with the 3M Velcro fasteners for proper
attachment techniques.
TV Mount Kits
The type of TV mount kit you use depends upon the TV model/manufacturer and
the TV location (fixed, swing arm or tilting wall mount, or a ceiling mount). Chief
the TV location (fixed, swing arm or tilting wall mount, or a ceiling mount). Chief
®
Professional Mounting Solutions (
) offers a broad range of
universal and custom flat panel TV mounts that are fast and easy to install. Use the
Chief‟s MountFinder Pro feature on their website to quickly find Chief product
information and compatible mounts for specific flat panel TVs.
Chief‟s MountFinder Pro feature on their website to quickly find Chief product
information and compatible mounts for specific flat panel TVs.
DMP Power Options
Power over Ethernet (PoE) is the recommended option for powering the DMPs. If
you use PoE, ensure that the DMP is connected to a recommended IDF switch, as
prescribed in the Connected Stadium Design and Implementation Guide.
you use PoE, ensure that the DMP is connected to a recommended IDF switch, as
prescribed in the Connected Stadium Design and Implementation Guide.
The following illustration shows options for providing power the DMP.