Cisco Cisco StadiumVision Director Manual De Mantenimiento
© 2011 Cisco Systems, Inc. All rights reserved.
Page 27 of 76
It uses an IP Phone object “Background” which is undocumented and not TAC
supported. This object can become obsolete at any time without notification. It is
based on IP Phone firmware which changes frequently.
supported. This object can become obsolete at any time without notification. It is
based on IP Phone firmware which changes frequently.
For these reasons it is suitable only for a one
‐time initial bulk deployment and should
not be used beyond that.
As an alternative, you can use a third-party application called VoIP Integration
Background Deployer. The process for using this application is documented in the
“IP Phone Background Deployment” application note located on Sharepoint.
Background Deployer. The process for using this application is documented in the
“IP Phone Background Deployment” application note located on Sharepoint.
Enabling IP Phones for Local TV Control
After the Cisco IP Phone, CUCM, and CUAE have been installed and are
operational, to enable the Cisco IP Phone to act as local control for a designated
area (such as a luxury suite) do the following:
operational, to enable the Cisco IP Phone to act as local control for a designated
area (such as a luxury suite) do the following:
Step
For instructions, see
On CUAE:
Install the StadiumVision Luxury Suite Control
application
application
Load the StadiumVision IP Phone graphics
On CUCM:
Configure StadiumVision services for the IP Phone
Configure the default IP Phone page:
- For luxury suites, set the default page of the IP
Phone to the StadiumVision services page
- For administrative areas, the default page of the IP
Phone should be the call services page.
Load the StadiumVision background graphic.
Configure any speed dials.
On StadiumVision Director:
Identify the CUCM and CUAE servers
Configure the IP Phone password(s)
Define the IP Phone as a control device and specify
whether it is used in a luxury suite environment (both
TV control and commerce integration services are
enabled) or in an administrative office (only TV control
services are enabled)
whether it is used in a luxury suite environment (both
TV control and commerce integration services are
enabled) or in an administrative office (only TV control
services are enabled)
Associate the DMPs with local control area (Luxury
Suite) and label the DMPs to assist in TV identification
by the user
Suite) and label the DMPs to assist in TV identification
by the user
Associate the IP Phone with local control area (Luxury
Suite)
Suite)
Change the IP Phone background to the provided
StadiumVision graphic (or venue-specific graphic)
StadiumVision graphic (or venue-specific graphic)
Change the timeout values on the IP phone