Cisco Cisco StadiumVision Mobile Reporter Notas de publicación
© 2011 Cisco Systems, Inc. All rights reserved.
16 of 26
9. Verify that the script changed the value of max_connections to 2000.
[manufac@nbrunsga-svd ~]$ cat /etc/my.cnf
[mysqld]
[mysqld]
lower_case_table_names=1
set-variable=max_connections=2000
set-variable=max_connections=2000
10. Reboot the servers:
sudo reboot
Installing Service Pack 2 for Cisco StadiumVision Director
Release 2.3
Release 2.3
Before installing SP2, be sure that you have read the information in the “
” section of this document.
NOTES
•
Be sure that you have installed SP1 before installing SP2.
•
The installation procedure for SP2 varies slightly from SP1.
To install SP2 for Cisco StadiumVision Director Release 2.3, perform the following steps:
1. Download either the 32-bit or the 64-bit SP2 files from Cisco.com and upload them to your
Cisco StadiumVision Director server.
See
2. Create a directory on the Cisco StadiumVision Director server for the SP2 files:
mkdir ~/SP2
cd ~/SP2
cd ~/SP2
3. Copy the SP2 image and MD5 checksum files to this directory.
4. Open an SSH session to your Cisco StadiumVision Director server, using the “snetac” temporary
account.
account authentication and login.
5. Verify the integrity of the zip file by calculating the MD5 checksum on the SP2 image package,
and compare that value to the value in the MD5 checksum file using the commands shown in the
example. The output values should match.
example. The output values should match.
md5sum SV-DIRECTOR-SP2-2.3.0-78.i386.zip
cat SV-DIRECTOR-SP2-2.3.0-78.i386.zip.md5sum
cat SV-DIRECTOR-SP2-2.3.0-78.i386.zip.md5sum
6. Unzip the SP2 file:
unzip SV-DIRECTOR-SP2-2.3.0-78-i386.zip
7. Execute the script:
sudo ./SV-DIRECTOR-SP2-2.3.0-78.i386.sh
8. Reboot the servers:
sudo reboot