Cisco Cisco StadiumVision Mobile Notas de publicación
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Page 24 of 47
•
The transition between an existing video feed to black is longer though the
overall duration from the time when the trigger to change is invoked to when the
channel is made visible on the screen is about the same.
channel is made visible on the screen is about the same.
•
The init.FAILOVER_URL MIB, which is used by Cisco StadiumVision Director
when setting global MIB settings, has been removed from the DMP firmware.
This change will be accommodated in an upcoming release. For Cisco
StadiumVision 2.2.x, do the following:
This change will be accommodated in an upcoming release. For Cisco
StadiumVision 2.2.x, do the following:
-
cd /opt/apache-tomcat-6.0.18/webapps/StadiumVision/WEB-INF/classes/
-
sudo vi application.properties
-
Search for “4310.deploy.init.FAILOVER” and comment out that line:
#Globaldmpsetting.4310.deploy.init.FAILOVER_URL=<4310_FAILOVER_URL>
-
Restart tomcat.
Cisco StadiumVision Director
•
Before deploying Cisco StadiumVision Director release 2.2, you must upgrade
the memory in the server to 16 GB.
•
If you are deploying the new Cisco StadiumVision Director server, note the
following:
-
The Cisco StadiumVision Director (C200) server and the associated rail
mount kit is significantly longer than a Cisco ADE. This means that the server
and rail kit will extend beyond the rear of a standard-depth data center
rack/cabinet. While deeper cabinets that can accommodate the solution are
generally available, it's important to understand that such cabinets may not
have been purchased or installed ahead of time by the customer.
and rail kit will extend beyond the rear of a standard-depth data center
rack/cabinet. While deeper cabinets that can accommodate the solution are
generally available, it's important to understand that such cabinets may not
have been purchased or installed ahead of time by the customer.
-
The Cisco StadiumVision Director (C200) server rail mount kit does not offer
any means to attach to a rack or cabinet with drilled or threaded rails. The
rail mount kit can be attached only to racks and cabinets with square-holed,
server-style rails. As an alternative, you can use adapter brackets available
from a third party:
rail mount kit can be attached only to racks and cabinets with square-holed,
server-style rails. As an alternative, you can use adapter brackets available
from a third party:
•
When operating in mixed mode (using both DMP 4305G and 4310Gs), keep the
following in mind:
-
You must specify the model of DMP when you add it to Cisco StadiumVision
Director.
-
Only like model DMPs can be in a Group. You cannot have a group that
contains both DMP 4305Gs and 4310Gs.
-
All DMPs must be at the same firmware version.