Cisco Cisco 1 GHz GainMaker Amplifier Hoja De Datos
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 7
Ordering Information
The Cisco GainMaker High Gain Balanced Triple is available in a wide variety of configurations. The desired
configuration is “built” by accessing the Cisco Commerce Workspace tool at
configuration is “built” by accessing the Cisco Commerce Workspace tool at
. The user specifies the new Assemble To Order (ATO) Product ID for the
Cisco GainMaker System Amplifier High Gain Balanced Triple “GMSA-HGBT” and the tool steps through the
available options, from which to choose. Services may also be selected during this process. Once all the desired
options are selected, the configuration and price are displayed. When the “Done” radio button is clicked, the
options are selected, the configuration and price are displayed. When the “Done” radio button is clicked, the
configuration can be exported and saved for future use or immediate ordering.
This page contains ordering information for required and optional accessories. Please consult with your Account
Representative, Customer Service Representative, or System Engineer to determine the best configuration for your
particular application.
Table 7.
Required Accessories
Required Accessories
Part Number
Plug-in Pads (attenuators): Available in 0.5 dB steps from 0 to 20.5 dB
● 1 required for forward input
● 1 required for AGC, if applicable
● 1 required for AGC, if applicable
*
● 4 required for reverse (3 input, 1 output)
*
To determine AGC pad value, subtract 34 dB from the design value main port RF output level at
the AGC pilot frequency
589693 (0 dB) sequentially through 589734
(20.5 dB)
(20.5 dB)
Plug-in Forward Cable Equalizer: Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
● 1 required for forward input
4007228 (0 dB)
sequentially through 4007248 (30 dB)
Plug-in Reverse Cable Equalizer: Available in 1 dB steps from 0 to 12 dB at 85 MHz
● 1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and 4036769 (1 dB)
sequentially through 4036780 (12 dB)
The optional accessories listed in Table 8 may be ordered separately.
Table 8.
Optional Accessories
Optional Accessories
Part Number
24V Power Supply for Cisco GainMaker HGBT
734771
230 VAC Crowbar Surge Protector (plug-in, one per station)
4007682
Plug-in Inverse Equalizer: Simulates cable equivalent tilts (creates tilt opposite that of
equalizers). Use in place of forward input EQ as needed to maintain proper output tilt in
short spaced locations. Available in approximate 1.6 dB “cable equivalent” steps from 1.6
to 16.2 dB.
equalizers). Use in place of forward input EQ as needed to maintain proper output tilt in
short spaced locations. Available in approximate 1.6 dB “cable equivalent” steps from 1.6
to 16.2 dB.
4007486 (1.6 dB)
sequentially through 4007495 (16.2 dB)
Long Reach Test Point Adapter
562580
Status Monitoring Transponder
Refer to the Cisco GainMaker Status
Monitoring Transponder Data Sheet.
Monitoring Transponder Data Sheet.
The housing options listed in Table 9 may be included with the product if ordered using the Cisco GainMaker
Ordering Matrix. They may also be ordered separately.