KRAM 68167 Prospecto

Descargar
Página de 2
Drive & Talk 
Product Description 
Drive & Talk Cable 68167 for 
Lexus GS300 / GS350 / GS400 / GS430 / GS450h 
With Mark Levinson sound system 
 
Drive  &  Talk enables the use of the car speakers for phone con-
versation. 
 
Speaker-function: This is achieved by using the mutebox-relays to 
disconnect the rear speaker and connect the front speakers to the 
carkit. This way the radio sound is muted and the sound from the 
carkit is sent through the cars front speakers. You will achieve a 
perfect hands-free sound without interference from the car radio. 
 
For  a  complete  cableset  two  item  numbers  are  needed.  The  1st 
item number includes the mutebox and the car-specific cableset. 
The 2nd item number is a carkit-specific adaptor-cable for adapt-
ing the car-specific cable to the carkit. 
 
Power supply of the carkit: All car-specific cablesets have an inte-
grated  carkit-powersupply.  In  the  car-specific  cableset  the  con-
stant 12v and the ground wire are connected to the 6 way con-
nector.  This  connector  is  to  be  fitted  to  the  6  way  connector  on 
the  carkit  adaptor.  This  way  powersupply,  of  the  carkit,  is 
achieved without cutting the cars wiringloom.  
 
Mute function: The mutewire is connected from the carkit to the 
mutebox  through  the  carkit  adaptor.  The  mutewire  is  also  con-
nected to the radios mute input. This enables the use of the ra-
dios  built  in  mute  function.  If  the  radios  mute  input  pin  is  un-
known the mute wire can be found in a yellow flywire fitted with 
a  bullit  connector.  Please  note  that  not  all  radios  are  equipped 
with a mute function.
 
The professional mute 
Drive & Talk 
The professional mute 
Made in Denmark by 
Kram Telecom A/S 
Connector configurations 
RR -  RF -  LF - 
LR - 
RR +  RF +  LF +  LR + 
   - 
SP +   SP - 
LR -  LF - 
RF -  RR - 
LR +  LF +  RF +  RR + 
Technical Specifications
 
 
Voltage supply range :  
10-16 VDC 
Current usage :   
 
<5 uA (passive) / 40 mA (active) 
 
Activation voltage
 
 
Active :  
 
 
< +6VDC 
 
Passive :    
 
> +8VDC   
Maximum output pr. speaker:   30 Watt RMS / 
 
 
 
 
 
50 Watt music power  @ 4 Ohm 
 
 
 
 
 
(3 Amp relays) 
Maximum current supplied by Mutewire:   
 
 
 
 
 
 
 
10 mA. Active when grounded. 
Size:   
 
 
 
75 x 40 x 22 mm 
EN167