Cisco Cisco 1 GHz GainMaker Amplifier Hoja De Datos
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 7
Product Specifications
Table 6.
Environmental Specifications
Environmental
Units
Value
Operating Temperature Range
°F/°C
-40 to +140°F (-40 to +60°C)
Relative Humidity Range
%
5 to 95%
Mechanical
Housing Dimensions (L x H x D)
in./mm
11.7 in. L x 9.8 in. H x 6.7 in. D (297.2 mm L x 248.9 mm H x 170.2 mm D)
Weight
● Housing with power supply
lb/kg
3 lbs, 12 oz. (1.7 kg)
9 lbs, 4 oz. (4.2 kg)
Ordering Information
The Cisco GainMaker Line Extender is available in a wide variety of configurations. The desired configuration is
“built” by accessing the Cisco Commerce Workspace tool at
“built” by accessing the Cisco Commerce Workspace tool at
The user specifies the new Assemble To Order (ATO) Product ID for the Cisco GainMaker Line Extender
“GM-LE”
and the tool steps through the available options, from which to choose. Services may also be selected during this
process. Once all the desired options are selected, the configuration and price are displayed. When the “Done”
process. Once all the desired options are selected, the configuration and price are displayed. When the “Done”
radio button is clicked, the configuration can be exported and saved for future use or immediate ordering.
This page contains ordering information for required and optional accessories. Please consult with your Account
Representative, Customer Service Representative, or System Engineer to determine the best configuration for
your particular application.
Table 7.
Required Accessories - Must be Ordered Separately
Required Accessories
Part Number
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20.5 dB
● 1 required for forward input
● 1 required for AGC, if applicable
● 1 required for AGC, if applicable
*
● 2 required for reverse (1 input, 1 output)
*
To determine AGC pad value, subtract 29 dB from the design value main port RF output level at the
AGC pilot frequency (applies to line extender only).
589693 (0 dB) sequentially through
589734 (20.5 dB)
589734 (20.5 dB)
Plug-in Forward Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
● 1 required for forward input
4007228 (0 dB) sequentially thru
4007248 (30 dB)
4007248 (30 dB)
Plug-in Reverse Equalizer - Available in 1 dB steps from 0 to 12 dB at 65 MHz
● 1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and 4036769 (1 dB)
sequentially through 4036780 (12 dB)
sequentially through 4036780 (12 dB)
Table 8.
Optional Accessories (May be Ordered Separately)
Optional Accessories
Part Number
230 VAC Crowbar Surge Protector (plug-in, one per station)
4007682
Plug-in Inverse Equalizer. Simulates cable equivalent tilts (creates tilt
opposite that of equalizers). Use in place of forward input EQ as
needed to maintain proper output tilt in short spaced locations.
Available in 1.6 dB cable equivalent steps from 1.6 to 16.2 dB.
opposite that of equalizers). Use in place of forward input EQ as
needed to maintain proper output tilt in short spaced locations.
Available in 1.6 dB cable equivalent steps from 1.6 to 16.2 dB.
4007486 (1.6 dB) sequentially through 4007495 (16.2 dB)
Long Reach Test Point Adapter
562580
Status Monitoring Transponder
Refer to the Cisco GainMaker Status Monitoring Transponder Data
Sheet.
Sheet.
Unless otherwise noted, specifications reflect typical performance and are referenced to 68°F (20°C). Specifications are based
upon measurements made in accordance with SCTE/ANSI standards (where applicable), using standard frequency assignments.
upon measurements made in accordance with SCTE/ANSI standards (where applicable), using standard frequency assignments.