Cisco Cisco 870 MHz GainMaker Amplifiers Hoja De Datos
GainMaker High Output HGD - 5-42/54-1002 MHz
5
Ordering Information
The GainMaker Ordering Matrix provides ordering information for configured amplifier modules or stations. This page
contains ordering information for required and optional accessories that are not included as part of a configured amplifier
module or station. Consult your account representative or customer service representative for ordering assistance.
contains ordering information for required and optional accessories that are not included as part of a configured amplifier
module or station. Consult your account representative or customer service representative for ordering assistance.
The following Required Accessories must be ordered separately (not included via GainMaker Ordering Matrix):
Required Accessories
Part Number
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20.5 dB
•
•
1 required for forward input
•
1 required for AGC, if applicable*
•
4 required for reverse (3 input, 1 output)
*To determine AGC pad value, subtract 34 dB from the design value main port RF output level at the AGC pilot
frequency
frequency
589693 (0 dB)
sequentially thru
589734 (20.5 dB)
Plug-in Forward Cable Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
•
•
1 required for forward input
4007228 (0 dB)
sequentially thru
4007248 (30 dB)
Plug-in Reverse Cable Equalizer – Available in 1 dB steps from 0 to 12 dB at 40 MHz
•
1 required for reverse output – unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and
589628 (1 dB)
sequentially thru
589639 (12 dB)
Plug-In Signal Director for Auxiliary output – 1 required, chose from below:
• Jumper
• Jumper
• 2-way
Splitter
•
DC-8 Directional Coupler
• DC-12
Directional
Coupler
4008208
4008364
4008365
4008366
4008364
4008365
4008366
The following Optional Accessories may be ordered separately:
Optional Accessories
Part Number
24V Power Supply for GainMaker High Output HGD
4026157
230 V AC Crowbar Surge Protector (plug-in, one per station)
715973
Plug-in Inverse Equalizer. Simulates cable equivalent tilts (creates tilt opposite that of equalizers). Use in place of
forward input EQ as needed to maintain proper output tilt in short spaced locations. Available in approx. 1.6 dB
“cable equivalent” steps from 1.6 to 16.2 dB.
forward input EQ as needed to maintain proper output tilt in short spaced locations. Available in approx. 1.6 dB
“cable equivalent” steps from 1.6 to 16.2 dB.
4007486 (1.6 dB)
sequentially thru
4007495 (16.2 dB)
Long Reach Test Point Adapter
562580
Status Monitoring Transponder – * see GainMaker Status Monitoring Transponder Data Sheet
*
The following Housing Options may be included with the product if ordered using the GainMaker Ordering Matrix. They may
also be ordered separately.
also be ordered separately.
GainMaker System Amplifier Housing – 1 required Housing includes housing base, lid, wiring harness, and 24 V
power supply # 4022846. All Housings have 15 amp capacity.
power supply # 4022846. All Housings have 15 amp capacity.
Part Number
•
Uncoated 4 port housing without external test point access
4026387
•
Chromate Plated 4 port housing without external test point access
4026388
•
Uncoated 4 port housing with external test point access
4026385
•
Chromate Plated 4 port housing with external test point access
4026386
GainMaker System Amplifier Housing Upgrade Kit - 1 required if upgrading an existing SA II, II+, or III housing to
allow use of GainMaker System Amplifier modules. Includes a GainMaker System Amplifier housing lid, wiring
harness, and 24 V power supply # 4022846.
allow use of GainMaker System Amplifier modules. Includes a GainMaker System Amplifier housing lid, wiring
harness, and 24 V power supply # 4022846.
•
Uncoated 4 port housing lid without external test point access
4026389
•
Painted 4 port housing lid without external test point access
4026390
•
Uncoated 4 port housing lid with external test point access
4026391
•
Painted 4 port housing lid with external test point access
4026392
Seizure Upgrade Kit – 1 required if upgrading an existing SAII or SAII+ housing base to allow use of GainMaker
System Amplifier Modules. Includes high current (15 amp) rated seizure screws and anvils.
System Amplifier Modules. Includes high current (15 amp) rated seizure screws and anvils.
548775
Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, Scientific Atlanta, GainMaker, and ROSA are registered
trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document are property of their respective owners.
Specifications and product availability are subject to change without notice.
© 2008 Cisco Systems, Inc. All rights reserved.
Scientific-Atlanta, Inc.
1-800-722-2009 or 770-236-6900
trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document are property of their respective owners.
Specifications and product availability are subject to change without notice.
© 2008 Cisco Systems, Inc. All rights reserved.
Scientific-Atlanta, Inc.
1-800-722-2009 or 770-236-6900
www.scientificatlanta.com
Part Number 7014162 Rev A
May 2008