Cisco Cisco 1 GHz GainMaker Amplifier Hoja De Datos

®

 

5

 

 

The GainMaker Ordering Matrix provides ordering information for configured amplifier modules or stations.  This page 
contains ordering information for required and optional accessories that are not included as part of a configured amplifier 
module or station.  Consult your account representative or customer service representative for ordering assistance. 

 

Plug-in Pads (attenuators) -  Available in 0.5 dB steps from 0 to 20 dB 
• 

1 required for forward input  

• 

1 required for AGC, if applicable* 

• 

2 required for reverse (1 input, 1 output) 

           *To determine AGC pad value, subtract 29 dB from the design value station RF        
            output level at the AGC pilot frequency (applies to Line Extender only) 

 

589693 (0 dB) 

sequentially thru 

589734 (20.5 dB) 

 
 

Plug-in Forward Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz  
• 

1 required for forward input  

4007228 (0 dB) 

sequentially thru 

4007248 (30 dB) 

 

Plug-in Reverse Equalizer - Available in 1 dB steps from 0 to 12 dB at 65 MHz 

• 

1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided) 

712719 (0 dB) and 

589736 (1 dB) 

sequentially thru 

589747 (12 dB) 

 

 

230 V AC Crowbar Surge Protector (plug-in, one per station) 

715973 

Plug-in Inverse Equalizer.  Simulates cable equivalent tilts (creates tilt opposite that of equalizers).  Use in place 
of forward input EQ as needed to maintain proper output tilt in short spaced locations.  Available in 1.6 dB “cable 
equivalent” steps from 1.6 to 16.2 dB.  

4007486 (1.6 dB) 

sequentially thru 

4007495 (16.2 dB) 

Long Reach Test Point Adapter 

562580 

Status Monitoring Transponder –   * see GainMaker Status Monitoring Transponder Data Sheet 

* 

 

GainMaker Line Extender Housing - 1 required.  Housing includes housing base, lid, wiring harness, and 
12/24 V power supply #593020.  All Housings have 15 amp capacity. 

• Uncoated 

housing 

without external test point access 

593095 

• 

Chromate Plated housing without external test point access 

593093 

• Uncoated 

housing 

with external test point access 

593094 

• 

Chromate Plated housing with external test point access 

593092 

 GainMaker Line Extender Housing Upgrade Kit - 1 required if upgrading an existing LEI, LEII, or LE III 
housing to allow use of GainMaker Line Extender modules.  Includes a GainMaker Line Extender housing lid, 
wiring harness, and 12/24 V power supply #593020. 

 

• 

Uncoated housing lid without external test point access 

593087 

• 

Painted housing lid without external test point access 

593085 

• 

Uncoated housing lid with external test point access 

593086 

• 

Painted housing lid with external test point access 

593084 

Power Pack Kit (for indoor 110 V AC powering) - Includes LE wall mount bracket, power supply with indicator 
light, power supply bracket, housing base, lid, wiring harness, power cord strain relief - * see GainMaker Power 
Pack Data Sheet 

748997 

Seizure Upgrade Kit - 1 required if upgrading an existing LEI or LEII housing base to allow use of GainMaker 
Line Extender Modules.  Includes high current (15 amp) rated seizure screws and anvils. 

548774 

 
 
 
 
 
 

 

Scientific-Atlanta, the Scientific-Atlanta logo, and GainMaker are registered trademarks of Scientific-Atlanta, Inc. 
ROSA is a trademark of Scientific-Atlanta Europe NV. 
Specifications and product availability are subject to change without notice. 
© 2006 Scientific-Atlanta, Inc. All rights reserved. 
 
Scientific-Atlanta, Inc. 
1-800-722-2009 or 770-236-6900 
www.scientificatlanta.com 

Part Number 7006954 Rev A 

 

March 2006