Cisco Cisco 1 GHz GainMaker Amplifier Hoja De Datos
GainMaker
®
- Unbalanced Triple - 5-55/70-1002 MHz
5
Ordering Information
The GainMaker Ordering Matrix provides ordering information for configured amplifier modules or stations. This page
contains ordering information for required and optional accessories that are not included as part of a configured amplifier
module or station. Consult your account representative or customer service representative for ordering assistance.
contains ordering information for required and optional accessories that are not included as part of a configured amplifier
module or station. Consult your account representative or customer service representative for ordering assistance.
The following Required Accessories must be ordered separately (not included via GainMaker Ordering Matrix):
Required Accessories
Part Number
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20.5 dB
•
•
1 required for forward input
•
1 required for AGC, if applicable*
•
4 required for reverse (3 input, 1 output)
*To determine AGC pad value, subtract 26 dB from the design value main port RF output level at the AGC pilot
frequency (applies to UBT only)
frequency (applies to UBT only)
589693 (0 dB)
sequentially thru
589734 (20.5 dB)
Plug-in Forward Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
•
•
1 required for forward input
4007228 (0 dB)
sequentially thru
4007248 (30 dB)
Plug-in Reverse Equalizer – Available in 1 dB steps from 0 to 12 dB at 55 MHz
•
1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and
712679 (1 dB)
sequentially thru
712690 (12 dB)
The following Optional Accessories may be ordered separately:
Optional Accessories
Part Number
230 V AC Crowbar Surge Protector (plug-in, one per station)
715973
Plug-in Inverse Equalizer. Simulates cable equivalent tilts (creates tilt opposite that of equalizers). Use in place of
forward input EQ as needed to maintain proper output tilt in short spaced locations. Available in approx. 1.6 dB
“cable equivalent” steps from 1.6 to 16.2 dB.
forward input EQ as needed to maintain proper output tilt in short spaced locations. Available in approx. 1.6 dB
“cable equivalent” steps from 1.6 to 16.2 dB.
4007486 (1.6 dB)
sequentially thru
4007495 (16.2 dB)
Long Reach Test Point Adapter
562580
Status Monitoring Transponder – * see GainMaker Status Monitoring Transponder Data Sheet
*
The following Housing Options may be included with the product if ordered using the GainMaker Ordering Matrix. They may
also be ordered separately.
also be ordered separately.
GainMaker System Amplifier Housing – 1 required Housing includes housing base, lid, wiring harness, and 24 V
power supply # 734771. All Housings have 15 amp capacity.
power supply # 734771. All Housings have 15 amp capacity.
Part Number
•
Uncoated 4 port housing without external test point access
714027
•
Coated 4 port housing without external test point access
714026
•
Uncoated 4 port housing with external test point access
714025
•
Coated 4 port housing with external test point access
714024
GainMaker System Amplifier Housing Upgrade Kit - 1 required if upgrading an existing SA II, II+, or III housing to
allow use of GainMaker System Amplifier modules. Includes a GainMaker System Amplifier housing lid, wiring
harness, and 24 V power supply # 734771.
allow use of GainMaker System Amplifier modules. Includes a GainMaker System Amplifier housing lid, wiring
harness, and 24 V power supply # 734771.
•
Uncoated 4 port housing lid without external test point access
714023
•
Coated 4 port housing lid without external test point access
714022
•
Uncoated 4 port housing lid with external test point access
714021
•
Coated 4 port housing lid with external test point access
714020
Seizure Upgrade Kit – 1 required if upgrading an existing SAII or SAII+ housing base to allow use of GainMaker
System Amplifier Modules. Includes high current (15 amp) rated seizure screws and anvils.
System Amplifier Modules. Includes high current (15 amp) rated seizure screws and anvils.
548775
Scientific-Atlanta, the Scientific-Atlanta logo, and GainMaker are registered trademarks of Scientific-Atlanta, Inc.
ROSA is a trademark of Scientific-Atlanta Europe NV.
Specifications and product availability are subject to change without notice.
© 2006 Scientific-Atlanta, Inc. All rights reserved.
Scientific-Atlanta, Inc.
1-800-722-2009 or 770-236-6900
ROSA is a trademark of Scientific-Atlanta Europe NV.
Specifications and product availability are subject to change without notice.
© 2006 Scientific-Atlanta, Inc. All rights reserved.
Scientific-Atlanta, Inc.
1-800-722-2009 or 770-236-6900
www.scientificatlanta.com
Part Number 7006947 Rev B
November 2006