Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
Before You Begin
11
Fastener
Torque Specification
Illustration
Housing plugs
Test point port plugs
Test point port plugs
5 ft-lb to 8 ft-lb
(6.8 Nm to 10.8 Nm)
(6.8 Nm to 10.8 Nm)
Module securing screws
(Tx, Rx, PS, SM/LCM modules)
25 in-lb to 30 in-lb
(2.8 Nm to 3.4 Nm)
(2.8 Nm to 3.4 Nm)
RF cable connector
20 ft-lb to 25 ft-lb
(27.1 Nm to 33.9 Nm)
(27.1 Nm to 33.9 Nm)
Fiber optic cable connector
20 ft-lb to 25 ft-lb
(27.1 Nm to 33.9 Nm)
(27.1 Nm to 33.9 Nm)
Amplifier Module Cover
1.2 GHz GainMaker System Amplifier modules have aluminum cover attached to the
chassis with self-tapping screws. Normal field maintenance will not require the
removal of this cover.
chassis with self-tapping screws. Normal field maintenance will not require the
removal of this cover.
Module and Housing Compatibility
Housing Lid
The 1.2 GHz GainMaker System Amplifier module is compatible with the GainMaker
housing lid only. The amplifier will not work with System Amplifier II, II+, or III
housing lids.
housing lid only. The amplifier will not work with System Amplifier II, II+, or III
housing lids.
Housing Base
The 1.2 GHz GainMaker System Amplifier module is compatible with all GainMaker
housing bases. The amplifier modules will also work with System Amplifier II, II+,
and III housing bases. Additionally, the 1.2 GHz GainMaker System Amplifier
housing base is marked with a green label to indicate that it contains 15 A capable
spring loaded seizures. Both 1.0 GHz and 1.2 GHz GainMaker amplifier modules will
operate in the new 1.2 GHz GainMaker Amplifier housing base.
housing bases. The amplifier modules will also work with System Amplifier II, II+,
and III housing bases. Additionally, the 1.2 GHz GainMaker System Amplifier
housing base is marked with a green label to indicate that it contains 15 A capable
spring loaded seizures. Both 1.0 GHz and 1.2 GHz GainMaker amplifier modules will
operate in the new 1.2 GHz GainMaker Amplifier housing base.
Important: 1.2 GHz GainMaker System Amplifier modules are marked with a blue
label to indicate 15-ampere capability. The RF connectors in these modules are also
marked with blue. These amplifier modules must be used in conjunction with a
15-ampere capable housing base, which is marked with either a blue (1.0 GHz
housing base) or green (1.2 GHz housing base) label.
label to indicate 15-ampere capability. The RF connectors in these modules are also
marked with blue. These amplifier modules must be used in conjunction with a
15-ampere capable housing base, which is marked with either a blue (1.0 GHz
housing base) or green (1.2 GHz housing base) label.