Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
Chapter 2 Installation and Configuration
34
5 Snap the power cable harness into place in the holes provided.
6 Attach the 10-pin keyed connector of the power cable and harness to the line
6 Attach the 10-pin keyed connector of the power cable and harness to the line
extender module.
Note: The 10-pin connector can be connected one way only. Confirm that the
connector installs securely to the line extender module.
Note: The 10-pin connector can be connected one way only. Confirm that the
connector installs securely to the line extender module.
7 Route the excess cable between the end of the molded power harness and the
10-pin keyed connector into the white plastic retainer clips on the module cover.
Note: