Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
Chapter 3 Balancing and Setup
54
The following diagram shows the location of the AGC related switch, controls, and
AGC pad.
AGC pad.
To Select the AGC Pad Value
Use the following formula to determine the correct AGC pad value.
AGC pad value = RF output level at pilot frequency (output port)
- 25 dB
To Align the AGC Module
Complete the following steps to align the AGC module.
1 Make sure that switch S1 is set to position 2.
1 Make sure that switch S1 is set to position 2.