Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
5
Upgrading the RF Split in the GainMaker System Amplifier
3 Unscrew the four module retainer screws.
4 Remove the system amplifier module from the housing.
Upgrading the Amplifier Module
1 Remove the diplexer covers by removing the diplexer retainer screws using a
1 Remove the diplexer covers by removing the diplexer retainer screws using a
flat-head screwdriver or cross screwdriver.
2 Remove the four (4) diplexers using the plastic handle on the component. There
are two (2) “mirrored” (blue PCB material) and two (2) “non-mirrored” (green
PCB material) diplexers.
PCB material) diplexers.