Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
748052 Rev C
GainMaker Amplifier Reverse Switch Removal Instruction Sheet
15
Line Extender Reverse Switch Removal,
Continued
Disconnecting Power From the Line Extender
These instructions explain how to disconnect the power from a line extender located
in the field. This step is required before the amplifier module can be removed from
the housing.
If your line extender is not located in the field, proceed to Removing the Amplifier
If your line extender is not located in the field, proceed to Removing the Amplifier
Module From the Housing.
WARNING!
Protect yourself from electric shock and your system from damage! Take
precautions when working with this equipment. Certain components can
deliver an electrical shock or cause burns. Disconnect the power before
removing the amplifier module from the housing.
CAUTION:
RF connectors and housing seizure assemblies can be damaged if AC shunt
power directors are not removed from the line extender before removing the
amplifier module from the housing.
Follow these steps to disconnect the power from a line extender located in the field.
1.
Using a torque wrench, loosen the four housing bolts in the housing lid, and
open the housing.