Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
20
GainMaker Amplifier Reverse Switch Removal Instruction Sheet
748052 Rev C
Line Extender Reverse Switch Removal,
Continued
6.
Depending on the type of amplifier cover screws on the amplifier module
cover, use either a Phillips-head or T-15 Torx bit screwdriver to loosen the 12
screws, then remove the cover.
Note: The screws are captive to the cover, so they will not become lost.
Note: The screws are captive to the cover, so they will not become lost.
7.
Remove the amplifier module from its housing, and place the amplifier
module on a secure surface.
WARNING:
Avoid personal injury and damage to the amplifier module! Make sure
you place the amplifier module on a secure surface.
8.
Proceed to Removing the Reverse Switch.