Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 88 of 169
EXAMPLES
This example shows how to delete an NTP server host name:
nsc# connect policy-mgr
Cisco Prime Network Services Controller
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
nsc(policy-mgr)# scope org
nsc(policy-mgr) /org # scope deviceprofile default
nsc(policy-mgr) /org/deviceprofile # delete ntp-server networkTime
nsc(policy-mgr) /org/deviceprofile* # commit-buffer
nsc(policy-mgr) /org/deviceprofile #
Changing the Domain Name
You can set the domain name.
Caution Changing the domain name will cause new certificate generation designed to warn the user of the impact
of the change. The VM Manager Extension file will have to be exported again and installed on vCenter. Any web
browser client that had the certificate installed will get a prompt for a new certificate.
of the change. The VM Manager Extension file will have to be exported again and installed on vCenter. Any web
browser client that had the certificate installed will get a prompt for a new certificate.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope deviceprofile <profile-name>
4. scope domain-name <name-of-the-domain-name-entry>
5. set domain <new-domain-name>
6. commit-buffer