Cisco Cisco OptoStar II Driver Amplifier Guía De Instalación

Descargar
Página de 64
Installing/Removing the Modules, Continued 
To Remove the Module   
1.  Remove the RF cables from the rear panel of the module. 
2.  Loosen the mounting screws on lower front panel of the module by hand or 
screwdriver, to release the module from the chassis.   
3.  Pull the module slightly to unseat the connector.   
4.  Hold the module and gently remove it from the chassis
 
Note: Do not use the mounting screws as a handle when removing the module. 
Follow the steps as shown in the following illustration. 
 
 
 
 
 
 
OL-29669-02 
Installation 
2-5