Cisco Cisco Unified CallConnector for Microsoft Windows
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Cisco Systems, Inc.
Page
41
41
Overview
MOBILITY CONFIGURATION OVERVIEW
The Mobility Service makes use of additional features of the Cisco CME and Cisco CUE. These
features have to be provisioned on the CME and CUE and then the corresponding parameters
have to be configured on the UCC system. In this chapter, the CME and CUE setup requirements
are discussed followed by the UCC Server configuration. It provides a step-by-step tutorial on how
to setup the environment for Cisco CallConnector Mobility Service to work.
features have to be provisioned on the CME and CUE and then the corresponding parameters
have to be configured on the UCC system. In this chapter, the CME and CUE setup requirements
are discussed followed by the UCC Server configuration. It provides a step-by-step tutorial on how
to setup the environment for Cisco CallConnector Mobility Service to work.
CME/CUE Setup Requirements
Setting on CME/CUE to support UCC Mobility – Single Number Reach Service
Set up Radius accounting parameters to send messages to UCC Server
Provision Mobility ephones on CME for use by the Mobility Service
Setup Hardware Conferencing including Ad-Hoc conferencing
Upload CUE Transfer to voicemail script and setup pilot numbers
Provision a hunt group to route calls to mobility ephones for DISA features (for
Setup Hardware Conferencing including Ad-Hoc conferencing
Upload CUE Transfer to voicemail script and setup pilot numbers
Provision a hunt group to route calls to mobility ephones for DISA features (for
DISA only)
Steps to Configure Mobility Single Number Reach Service on UCC
Configure CME location, features settings and dialing rules
Select the mobility-ephones previously configured in the CME
Configure Single Number Reach system parameters.
Setup ephone pools for the Single Number Reach Service.
Assign ephones to the ephone pools that’ll be used by the SNR Service.
Configure user contact information including the voicemail box and SNR PIN.
Select the mobility-ephones previously configured in the CME
Configure Single Number Reach system parameters.
Setup ephone pools for the Single Number Reach Service.
Assign ephones to the ephone pools that’ll be used by the SNR Service.
Configure user contact information including the voicemail box and SNR PIN.
Additional Steps to Configure Dial-In Service on CME and UCC
Select the additional Mobility ephones configured in the CME for the DISA
feature.
Configure Dial-In Access system parameters.
Setup ephone pools for the Dial-In Access service.
Assign ephones to the ephone pools that’ll be used by the DISA Service.
Configure user contact information including the DISA password.
Setup ephone pools for the Dial-In Access service.
Assign ephones to the ephone pools that’ll be used by the DISA Service.
Configure user contact information including the DISA password.