Cisco Cisco Unified CallConnector for Microsoft Windows

 

Cisco Systems, Inc. 

Page

 48 

 

48 

Cisco Unified CallConnector Mobility Service 

Technical Overview 

Dialing Plans and Dialing 
Rules 

The UCC Server allows administrators to setup the location, 
extension number lengths, outside access codes for each router. The 
UCC Server also provides per router a digit manipulation table for 
pre-processing the telephone numbers for dialing and lookup. 

 

The UCC Mobility Service uses CME ephones to make and receive calls to provide the Single 
Number Reach and Dial-In Access services.  

These ephones have to be configured in the Cisco CME for each of  the routers connected to the 
UCC Mobility Service. The mobility ephones have a specific configuration requirement as 
described below: 

Ephone MAC Address 

Example: 
AAAA.BBBB.1000 

This ‘Virtual MAC Address’ is used as an identifier for the ephone. 
This should be unique for the UCC System and is required to be 
unique for each router. (Since there are multiple mobility-ephones 
configured for each router, you cannot use the network adapter MAC 
address. In addition the CME requires this to follow the MAC address 
format, but does not require this to be a physical MAC address.) 

Ephone Type 

7960 

Default phone type for the Mobility-ephones 

Ephone DNs 

Three single line DN, that are not shared, for each mobility ephone. 

Conference Control 

Keep Conference – so that when the when the Mobility Service drops 
out the call is maintained 

Feature Set 

Standard ephone feature set with pickup, conference, transfer etc. 

Codec G711 

codec