Cisco Cisco Unified CallConnector for Microsoft Windows
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Cisco Systems, Inc.
Page
56
56
Cisco Unified CallConnector Mobility Service
Technical Overview
Setup on Conferencing:
Prerequisites
•
Cisco Unified CME 4.1 or a later version
•
You must have a PVDM2-8, PVDM2-16, PVDM2-32, or PVDM2-64 high-density packet
voice digital signal processor module hosted on the motherboard or on a module such
as the NM-HDV2 or NM-HD-2VE.
voice digital signal processor module hosted on the motherboard or on a module such
as the NM-HDV2 or NM-HD-2VE.
•
For Cisco Unified IP Phone 7985, firmware version 4-1-2-0 or a later version
Restrictions
•
The maximum number of meet-me conference parties is 32 for one DSP using the
G.711 codec and 16 for the G.729 codec.
G.711 codec and 16 for the G.729 codec.
•
A participant cannot join more than one conference at the same time.
•
Ad hoc conferencing for more than three parties (hardware-based) is not supported on
the Cisco Unified IP Phone 7906 and 7910 and Cisco Unified IP Phone 7914 Expansion
Module.
the Cisco Unified IP Phone 7906 and 7910 and Cisco Unified IP Phone 7914 Expansion
Module.
•
Ad hoc conferencing for more than three parties is not supported on Cisco Unified IP
phones running SIP.
phones running SIP.
•
Hardware-based ad hoc conferencing does not support the local-consult transfer
method (transfer-system local-consult command).
method (transfer-system local-consult command).
Enabling DSP Farm Services for a Voice Card
To enable DSP farm services for a voice card to support multi-party ad hoc and meet-me
conferences, perform the following steps. For detailed steps for configuring CME conferencing, see
Appendix B.
conferences, perform the following steps. For detailed steps for configuring CME conferencing, see
Appendix B.
Summary Steps
Step 1.
enable
Step 2.
configure terminal
Step 3.
voice-card slot
Step 4.
dsp services dspfarm
Step 5.
exit
Configuring Join and Leave Tones
To configure tones to be played when parties join and leave ad hoc and meet-me conferences,
perform the following steps for each tone to be configured.
perform the following steps for each tone to be configured.
Summary Steps
Step 1.
enable
Step 2.
configure terminal
Step 3.
voice class custom-cptone cptone-name
Step 4.
dualtone conference