Cisco Cisco Unified CallConnector for Microsoft Windows

 

Cisco Systems, Inc. 

Page

 84 

 

84 

Cisco Unified CallConnector Mobility Service 

Technical Overview 

The following is a summary of the configuration steps for setting up the mobility-ephones for use by 
the UCC Mobility Service. 

ƒ 

Provision ephones for use by the UCC Mobility Service on each CME/UC500. 

ƒ 

From the Server Wizard, download all the provisioned ephones and ephone-DNs. 

ƒ 

Select with ‘Connect as Softphone’ option checked all these mobility-ephones from each of 
the routers. 

ƒ 

Verify that the ephones have been provisioned correctly with the required ephone-DNs 

ƒ 

Create ephone pools. This gives a name to the pool, specifies if it is shared between 
applications or is dedicated to one application, and specifies the mobility application(s) that 
will use the ephones from this pool. 

ƒ 

Allocates the ephones to the pool. In this step, the available ephones are moved to the 
pools defined in the previous step. 

The objective of these configuration steps is to specify for the Single Number Reach and Dial-In 
Access applications the list of ephones available for use by these applications. The details for each 
of the configuration steps above are described in detail below. 

Mobility ephones need to be provisioned on the routers as described in the previous chapter. You 
can verify the configuration of these ephones using the ‘Show Ephone’ command from the 
Command Line Interface (CLI). Examples of the general use ephone and an ephone with a shared 
appearance DN is showed below. 

 

General Use Ephone: 

 

 

Shared-Appearance Ephone: