Cisco Cisco Unified CallConnector for Microsoft Windows
Cisco Systems, Inc.
Page
54
54
Cisco Unified CallConnector Mobility Service
Technical Overview
Configuration for DISA Service - Summary
Dial-IN Access
What needs to be setup
Select the additional Mobility
ephones for the DISA Service
ephones for the DISA Service
This configuration step specifies to the UCC system, the
ephones that have been configured in the CME for use by the
Mobility Service. These ephones must have the option ‗Connect
as Softphone‘ checked and must be configured with a virtual
MAC-address.
ephones that have been configured in the CME for use by the
Mobility Service. These ephones must have the option ‗Connect
as Softphone‘ checked and must be configured with a virtual
MAC-address.
Configure DISA System
parameters
parameters
The administrator can set a number of system wide parameters
for the Dial-In Access service. These include:
for the Dial-In Access service. These include:
a. Enable/Disable the Dial-In Access
b. Restrict only to calls from telephone numbers configured
UCC Corporate directory
c. Always require Dial-In password
d. Specify the pick-up numbers or use the DISA ephone-
DNs
In addition the administrator can set the caller-id transmission
rules for DISA.
rules for DISA.
Setup ephone pools for DISA
Service
Service
The ephones that have been configured for the Dial-In service
need to be associated with the DISA application. This is
performed by creating groups or pools of ephones and allocating
them to the mobility applications
need to be associated with the DISA application. This is
performed by creating groups or pools of ephones and allocating
them to the mobility applications