Cisco Cisco Unified CallConnector for Microsoft Windows

Cisco Systems, Inc.

Page 59

CME Configuration for Mobility Services

CME CONFIGURATION FOR MOBILITY
SERVICES

Setting up a Mobility-ephone

you would need to configure an ephone to have one or more shared-DN. Please follow
the steps below:

Step 1.

Click Start -> Run

Step 2.

Type telnet xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx would be your CME router IP
address)

Step 3.

Enter the username and password

Step 4.

Enter config t

Step 5.

Type ephone x (x would be the ephone id)

Step 6.

Type mac-address AAAA.BBBB.1000

Step 7.

Type type 7960

Step 8.

Type keep conference

Step 9.

Type username ucceph1 password cisco

Step 10.

Type button 1:a 2:b 3:c

a, b and c are single-line ephone DNs created for the mobility service.

Step 11.

Type exit when finished

Example of mobility-ephone

Extract from ‗Show run‘

ephone 28
username "38user28" password cisco
mac-address AAAA.BBBB.4307
type 7960
button 1:648 2:649 3:650
keep-conference

Extract from ‗Show ephone‘

ephone-28 Mac:AAAA.BBBB.4307 TCP socket:[124] activeLine:0 REGISTERED in SCCP ver 3 and Server in ver 3
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:3
IP:192.168.1.14 1889 Telecaster 7960  Telstrat keepalive 132 max_line 16
button 1: dn 648 number 4648 CH1   IDLE
button 2: dn 649 number 4649 CH1   IDLE
button 3: dn 650 number 4650 CH1   IDLE
Username: 38user28 Password: cisco

Setup an ePhone with Share-Call Appearance:

The shared call appearance on the mobility-ephones are used to support the option to pickup the
SNR call from the user‘s ephone by pressing the line button. The user‘s primary ephone-DN needs
to be configured on the shared mobility-ephone. When a call arri

ves at the user‘s ephone, it will

also ring at the shared mobility-ephone. If the rule conditions are met, then the Single Number