Cisco Cisco Unified SIP Proxy Version 8.6 Guía De Instalación

Descargar
Página de 12
5
Installation Guide for Cisco Unified SIP Proxy Release 9.1
  Configuring the CUSP Software
Configuring the CUSP Software
When you open the first session, the system launches the post installation configuration tool, and asks 
you if you want to start configuration immediately.
Enter the appropriate response, y or n. If you enter n, the system will halt. If you enter y, the system will 
ask you to confirm, then begin the interactive post installation configuration process.
The following is an example:
IMPORTANT::
IMPORTANT::    Welcome to Cisco Systems Service Engine 
IMPORTANT::     post installation configuration tool. 
IMPORTANT::
IMPORTANT:: This is a one time process which will guide 
IMPORTANT:: you through initial setup of your Service Engine.
IMPORTANT:: Once run, this process will have configured 
IMPORTANT:: the system for your location.
IMPORTANT::
IMPORTANT:: If you do not wish to continue, the system will be halted 
IMPORTANT:: so it can be safely removed from the router.
IMPORTANT::
Do you wish to start configuration now (y,n)? y
Are you sure (y,n)? y
***********************************
* Service Engine IP configuration *
***********************************
Please enter the IP address of your Module: 10.104.45.249
Please enter the netmask of your Module: 255.255.0.0
Please enter the default gateway for your Module: 10.104.45.245
The following IP configuration is set:
IP
 : 
10.105.45.249
NETMASK:255.255.0.0
GATEWAY: 10.104.45.245
Do you wish to use this configuration (y, n) [n]: y
Enter Hostname
(my-hostname, or enter to use se-10-104-45-249): Enter
Using se-10-104-45-249 as default
Enter Domain Name
(mydomain.com, or enter to use local domain): Enter
Using localdoamin as default
IMPORTANT:: DNS Configuration:
IMPORTANT:: 
IMPORTANT:: This allows the entry of hostnames, for example foo.cisco.com, instead 
IMPORTANT:: of IP addresses like 1.100.10.205 for application configuration.  In order 
IMPORTANT:: to set up DNS you must know the IP address of at least one of your
IMPORTANT:: DNS Servers.  
Would you like to use DNS (y,n)?y
Enter IP Address of the Primary DNS Server
  (IP address): 10.104.45.245
Found server 10.104.45.245