Cisco Cisco Digital Media Player 4400G Guía De Instalación
23
Getting Started Guide for Cisco Digital Media Players
78-19212-01
Configure Essential Settings
Procedure
Step 1
If your touchscreen shows a message that says it must download a touchscreen characterization file:
•
Do not disturb or interrupt this process. It occurs only once, automatically.
•
The process takes approximately 10 minutes to finish. When it is finished, your touchscreen will
clear the message automatically.
clear the message automatically.
•
Stop. You have completed this procedure and there is no need to perform any of its other steps.
Step 2
Because some touchscreen drivers cannot be calibrated on a DMP while it is playing video, use DMPDM
to stop all videos.
to stop all videos.
a.
Click Video Multicast in the Display Actions list, and then click Stop.
b.
Click Media URL in the Display Actions list, and then click Stop.
Step 3
Choose the browser rotation angle for your touchscreen.
Supported rotation angles are 0°, 90°, 180°, and 270°.
a.
Click Browser in the Settings list.
b.
Choose an option from the Screen Rotation Angle (clockwise) list, and then click Apply.
c.
Click Save Configuration in the Administration list, and then click Save.
d.
Click Restart DMP in the Administration list, and then click Restart.
Step 4
After your DMP restarts, log in again to DMPDM.
Step 5
Click Touch Screens in the Settings list.
Tip
If you do not see this option in DMPDM, your DMP might not support this feature. If you believe
that its hardware design allows for the possibility of such support, check whether any firmware
upgrade is available for your DMP that adds support for this feature:
that its hardware design allows for the possibility of such support, check whether any firmware
upgrade is available for your DMP that adds support for this feature:
•
Cisco DMS release notes —
.
•
Cisco DMS compatibility information —
If such firmware is available, obtain it and then complete the DMP firmware upgrade procedure
in the DMPDM user guide at
in the DMPDM user guide at
service contract might limit:
•
Which upgrades are available to you.
•
Where and how you obtain upgrades.
•
Whether you must pay anything to obtain upgrades.
To learn about Cisco service contracts, see
a.
Check the Currently Loaded Driver row to see which touchscreen driver, if any, is active on
your DMP.
your DMP.
The driver might be 3M, Zytronic, Elo, GeneralTouch, or possibly something else. As we test
various drivers, we might update this list between any two DMPDM releases.
various drivers, we might update this list between any two DMPDM releases.
Your DMP must use a driver that is compatible with your touchscreen.
b.
If the active driver is not compatible with your touchscreen, choose the compatible driver from the
Choose Touch Screen to Activate list.
Choose Touch Screen to Activate list.