Cisco Cisco Digital Media Player 4400G Guía De Instalación

Enter in the Default Gateway field the network gateway that your DMP should use with its static 
IP address.

Enter in the Primary DNS Server field the DNS server that your DMP should use with its static 
IP address.

(Optional) Will a network address translation (NAT) service give your DMP a private IP address? If so:

Choose Yes from the Using NAT list.

Enter in the NAT IP Address field the 1-to-1 public address (which is configured on the local router) 
that corresponds to the private IP address.

Click Apply.

Click Save Configuration in the Administration list, and then click Save.

Click Restart DMP in the Administration list, and then click Restart.

Ship or deliver the DMP to its deployment site, and then:

Connect it to its presentation system.

Connect it to its local network segment.

Connect it to its power source.

Stop. You have completed this procedure.

You can use DMPDM to change how long your DMP shows its splash screen during startup. This is 
useful when, for example, your organization prefers not to reveal an IP address casually to all observers.

A duration of 30,000 milliseconds (30 seconds) is the factory default.

A duration of 1 millisecond turns off the splash screen.

Any duration in the range from 2 to 5,000 milliseconds (5 seconds) does not have any effect.

Log in to DMPDM.

Click Browser in the Settings list.

Enter a new duration in milliseconds in the Splash Screen Display Time (in milliseconds) field.

Click Apply. 

Click Save Configuration in the Administration list, and then click Save.

Stop. You have completed this procedure.