Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Manual De Mantenimiento

System Settings

Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 

89

 

•

Language MD5 Checksum—MD5 checksum of the language file.

•

Maximum Available PoE Power (W)—Maximum available power that can 
be delivered by the PoE.

•

Total PoE Power Consumption (W)—Total PoE power delivered to 
connected PoE devices.

•

PoE Power Mode—Port Limit or Class Limit.

 

To enter system settings:

Click Administration > System Settings.

View or modify the system settings.

•

System Description—Displays a description of the device. 

•

System Location—Enter the location where the device is physically 
located.

•

System Contact—Enter the name of a contact person. 

•

Host Name—Select the host name of this device. This is used in the prompt 
of CLI commands:

-

Use Default—The default hostname (System Name) of these switches is: 
switch123456, where 123456 represents the last three bytes of the 
device MAC address in hex format.

-

User Defined—Enter the hostname. Use only letters, digits, and hyphens. 
Host names cannot begin or end with a hyphen. No other symbols, 
punctuation characters, or blank spaces are permitted (as specified in 
RFC1033, 1034, 1035).

•

System Mode—Select the system mode of this device.

If you change the system mode after clicking Apply, the system will 

require a reboot, and the startup configuration file will be gone after the boot.

-

L2—Select to place the device in Layer 2 system mode.

-

L3—Select to place the device in Layer 3 system mode.