Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica
Auto-Configuration
78-21485-01 Command Line Interface Reference Guide
201
10
Example 2. The following example specifies the auto mode and does not provide
an SCP extension. In this case "scp" is used.
an SCP extension. In this case "scp" is used.
boot host auto-config auto
Example 3. The following example specifies that only the SCP protocol will be
used:
used:
boot host auto-config scp
10.2
show boot
Use the show boot Privilege EXEC mode command to show the status of the IP
DHCP Auto Config process.
DHCP Auto Config process.
Syntax
show boot
Parameters
N/A
Default Configuration
N/A
Command Mode
Privilege EXEC mode
Examples
switchxxxxxx show boot
Auto Config
------------
Config Download via DHCP: enabled
Download Protocol Mode is SCP
SCP extension is scp
Next Boot Config Download via DHCP: default