Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica
802.1X Commands
78-21485-01 Command Line Interface Reference Guide
357
22
switchxxxxxx(config-if)# exit
Example 2. This example enables user-based VLAN assignment. If the RADIUS
server authorized the supplicant but did not provide a supplicant VLAN, the
supplicant is accepted and the static VLAN configurations is used.
server authorized the supplicant but did not provide a supplicant VLAN, the
supplicant is accepted and the static VLAN configurations is used.
switchxxxxxx(config)# interface gi1
switchxxxxxx(config-if)# dot1x radius-attributes static
switchxxxxxx(config-if)# exit
22.16 dot1x re-authenticate
The dot1x re-authenticate Privileged EXEC mode command manually initiates
re-authentication of all 802.1X-enabled ports or the specified 802.1X-enabled
port.
re-authentication of all 802.1X-enabled ports or the specified 802.1X-enabled
port.
Syntax
dot1x re-authenticate [
interface-id
]
Parameters
interface-id—Specifies an Ethernet port.
Default Configuration
If no port is specified, command is applied to all ports.
Command Mode
Privileged EXEC mode
Example
The following command manually initiates re-authentication of 802.1X-enabled
gi15:
gi15:
switchxxxxxx#
dot1x re-authenticate gi15