Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica

Voice VLAN Commands

576

78-21485-01 Command Line Interface Reference Guide

33

Using this command with the type parameter displays the voice VLAN parameters 
relevant to the type selected. The the local and agreed voice VLAN settings are 
displayed only if this is the current voice VLAN state.

The interface-id parameter is relevant only for the OUI VLAN type.

Examples:

The following examples display the output of this command in various 
configurations.

Example 1—Displays the auto voice VLAN parameters (this is independent of the 
voice VLAN state actually enabled).

switch>show voice vlan type auto

switchxxxxxx#show voice vlan type auto

Best Local Voice VLAN-ID is 5

Best Local VPT is 5 (default)

Best Local DSCP is 46 (default)

Agreed Voice VLAN is received from switch 00:24:01:30:10:00

Agreed Voice VLAN priority is  0 (active static source)

Agreed Voice VLAN-ID is 5

Agreed VPT is 5

Agreed DSCP is 46

Agreed Voice VLAN Last Change is 11-Jul-11 15:52:51

switchxxxxxx#

Example 2—Displays the current voice VLAN parameters when the voice VLAN state 
is auto-enabled.

switch>show voice vlan

Administrate Voice VLAN state is auto-enabled on IPv4

Operational Voice VLAN state is auto-enabled

Best Local Voice VLAN-ID is 5

Best Local VPT is 5 (default)

Best Local DSCP is 46 (default)

Agreed Voice VLAN is received from switch 00:24:01:30:10:00

Agreed Voice VLAN priority is  0 (active static source)