Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica
IPv6 First Hop Security
78-21485-01 Command Line Interface Reference Guide
995
55
Example 4—In the following example, ND Inspection detaches policy
policy1
from
the gi1 interface:
interface gi1
no ipv6 nd inspection attach-policy policy1
exit
55.21 ipv6 nd inspection attach-policy (VLAN mode)
To attach an ND Inspection policy to a specified VLAN, use the ipv6 nd inspection
attach-policy command in VLAN Configuration mode. To return to the default, use
the no form of this command.
attach-policy command in VLAN Configuration mode. To return to the default, use
the no form of this command.
Syntax
ipv6 nd inspection attach-policy
policy-name
no ipv6 nd inspection attach-policy
Parameters
policy-name
—The ND Inspection policy name (up to 32 characters).
Default Configuration
The ND Inspection default policy is applied.
Command Mode
Interface Configuration mode (VLAN)
User Guidelines
Use this command to attach a ND Inspection policy to a VLAN.
If the policy specified by the policy-name
argument is not defined, the command
is rejected.
Use the no form of the command to detach the current policy and to reattach the
default policy. The no form of the command does not have an effect if the default
policy was attached.
default policy. The no form of the command does not have an effect if the default
policy was attached.