Cisco Cisco Email Security Appliance C190 Referencia técnica
160
Cisco AsyncOS 9.1 for Email CLI Reference Guide
Chapter 3 The Commands: Reference Examples
Networking Configuration / Network Tools
Choose the operation you want to perform:
- EDIT - Edit an ethernet interface.
[]> edit
Enter the name or number of the ethernet interface you wish to edit.
[]> pair1
That value is not valid.
Enter the name or number of the ethernet interface you wish to edit.
[]> 12
That value is not valid.
Enter the name or number of the ethernet interface you wish to edit.
[]> 2
Please enter a non-default (1500) MTU value for the Data 2 interface.
[]> 1200
Ethernet interfaces:
1. Data 1 default mtu 1500
2. Data 2 mtu 1200
3. Management default mtu 1500
4. VLAN 12 default mtu 1500
Choose the operation you want to perform:
- EDIT - Edit an ethernet interface.
[]>
interfaceconfig
Description
Configure the interface. You can create, edit, or delete interfaces. You can enable FTP, change an IP
address, and configure Ethernet IP addresses.
address, and configure Ethernet IP addresses.
Usage
Commit: This command requires a ‘commit’.
Cluster Management: This command is restricted to machine mode.
Batch Command: This command supports a batch format.
Batch Format
The batch format of the
interfaceconfig
command can be used to perform all the fuctions of the
traditional CLI command.
•
Creating a new interface
interfaceconfig new <name>
<ethernet interface>