Jura 13341 Manual De Usuario
20
2 Preparing and using for the first time
Example: Proceed as follows to change the water hardness from
16°dH
to
25°dH
.
Precondition:
READY
is displayed.
k T Keep the Rotary Switch pressed until
RINSE
appears on
the display.
g T Turn the Rotary Switch until
HARDNESS
is displayed.
k T Press the Rotary Switch to enter the programme item.
16°dH
g T Turn the Rotary Switch until
25°dH
is displayed.
k T Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display to confirm the setting.
HARDNESS
g T Turn the Rotary Switch until
EXIT
is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
appears on the display.
You can adjust the grinder on a continuous scale to suit the roast
of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind setting is correct if the coffee flows regu-
larly from the coffee spout. In addition a fine, thick crema forms.
Our recommendations:
Select a fine setting for a light roast.
If the consistency of grind is too fine, the coffee only flows
in drips from the coffee spout.
T
Z
U
Adjusting the water
hardness
Adjusting the water
hardness
Adjusting the grinder
Adjusting the grinder
CAUTION
CAUTION