Cisco Cisco Web Security Appliance S390 Guía De Instalación
12
9
Power Up the Appliance
Power up the appliance by pressing the On/Off switch on the
front panel of the Cisco S190. You must wait 10 minutes for the
system to initialize each time you power up the system. After the
machine powers up, a solid green light indicates that the
appliance is operational.
front panel of the Cisco S190. You must wait 10 minutes for the
system to initialize each time you power up the system. After the
machine powers up, a solid green light indicates that the
appliance is operational.
Note
If turned on quickly after connecting power to the
appliance, the appliance powers up, the fans spin and
the LEDs turn on. Within 30-60 seconds, the fans stop
and all LEDs turn off. The appliance powers on 31
seconds later. This behavior is by design to allow the
system firmware and controller to synchronize.
appliance, the appliance powers up, the fans spin and
the LEDs turn on. Within 30-60 seconds, the fans stop
and all LEDs turn off. The appliance powers on 31
seconds later. This behavior is by design to allow the
system firmware and controller to synchronize.
Wait at least 10 minutes for the system to complete the
power up sequence and the LEDs to turn green. If you
turn the power off before the initialization is complete,
the appliance will NOT reach an operational state and
must be returned to Cisco.
power up sequence and the LEDs to turn green. If you
turn the power off before the initialization is complete,
the appliance will NOT reach an operational state and
must be returned to Cisco.
4
Traffic
Monitor
port 2
Monitor
port 2
Traffic monitor port for Simplex
Ethernet tap: One cable for all
packets destined for the internet
(T1), and one cable for all packets
coming from the Internet (T2).
Ethernet tap: One cable for all
packets destined for the internet
(T1), and one cable for all packets
coming from the Internet (T2).
5
Remote
Power Cycle
Power Cycle
The port that is used for Remote
Power Cycle (RPC).
Power Cycle (RPC).
6
Console
Indicates the console port that
directly connects a computer to the
appliance.
directly connects a computer to the
appliance.
7
Management
interface 1
interface 1
Indicates the Gigabit Ethernet
interface that is restricted to
management use only.
interface that is restricted to
management use only.
8
Management
interface 2
interface 2
The secondary Management Port.
This Gigabit Ethernet interface
cannot be used.
This Gigabit Ethernet interface
cannot be used.
Item
Port
Description