Cisco Cisco 3G Wireless WAN (GPRS EDGE UMTS HSDPA) High-Speed Interface Card
© 2016 Cisco and/or its affiliates All rights reserved. This document is Cisco Public Information. Page 21 of 23
Antenna Guide for ISR and CGR with Verizon Wireless 4G LTE
ANT-4G-PNL-
OUT-
OUT-
N
Description – Outdoor Use
• Available in Q2 CY2012
• Flat panel antenna
• Outdoor
• Flat panel antenna
• Outdoor
ANT-4G-SR-OUT-
TNC
TNC
Description – Outdoor Use
• Available Q2 CY2012
• Low-profile outdoor saucer antenna
• Low-profile outdoor saucer antenna
Item
Specification
CAB-L400-20-
TNC-
TNC-
N
20 ft, LMR-400 cable with a TNC male and N female
connector
connector
CAB-L400-50-
TNC-
TNC-
N
50 ft, LMR-400 cable with a TNC male and N female
connector
connector
The LTE eHWIC and GRWIC both have female TNC connectors for antennas.
www.cisco.com/en/US/prod/collateral/modules/ps5949/ps11540/ehwic_4g_ltehw.pdf
www.cisco.com/en/US/prod/collateral/routers/ps10967/ps10977/datasheet_c78-696807_ps10984_Products_Data_Sheet.html
The supplied Cisco eHWIC antennas have male TNC connections, and extension cables have
female TNC on one end, male TNC on the other end.
www.cisco.com/en/US/prod/collateral/routers/ps10967/ps10977/datasheet_c78-696807_ps10984_Products_Data_Sheet.html
The Outdoor GRWIC omni-directional stick antenna
ANT-4G-OMNI-OUT-N
has a female N
connector and must be used with a supported cable with male N and male TNC
CAB-L400-20-
TNC-N or CAB-L400-50-TNC-N
www.cisco.com/en/US/docs/routers/connectedgrid/antennas/installing/Outdoor_Omni_for_2G_3G_Cellular.html
The Outdoor GRWIC flat panel antenna
ANT-4G-PNL-OUT-N
has a female N connector and
must be used with a supported cable with male N and male TNC
CAB-L400-20-TNC-N or CAB-
L400-50-TNC-N
www.cisco.com/en/US/docs/routers/connectedgrid/antennas/installing/Outdoor_Multiband_Panel_4G.html
Although supported on either, it is recommended to use eHWIC antennas with the eHWICs and
GRWIC antennas with GRWICs. There is an outdoor antenna available for the LTE eHWIC,
ANT-4G-SR-OUT-TNC. The outdoor GRWIC antennas and their required associated cables can
be used with an LTE eHWIC (as spares, with “=” added to the sku). Two antennas should always
be used with an LTE GRWIC, LTE eHWIC, or C819G-4G-V.