Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica
Virtual Local Area Network (VLAN) Commands
OL-32830-01 Command Line Interface Reference Guide
1082
56
•
The association of secondary VLANs with a primary VLAN cannot be
removed if there are private VLAN ports that are members in the secondary
VLAN.
removed if there are private VLAN ports that are members in the secondary
VLAN.
•
In MSTP mode, all the VLANs that are associated with a private VLAN must
be mapped to the same instance.
be mapped to the same instance.
Example
The following example associate secondary VLAN 20,21,22 and 24 to primary
VLAN 2.
VLAN 2.
switchxxxxxx(config)#
interface vlan 2
switchxxxxxx(config-if)#
private-vlan association add 20-22,24
56.30 switchport private-vlan mapping
Use the switchport private-vlan mapping Interface Configuration mode command
to configure the VLANs of the private VLAN promiscuous port. Use the no form of
this command to reset to default.
to configure the VLANs of the private VLAN promiscuous port. Use the no form of
this command to reset to default.
Syntax
switchport private-vlan mapping
primary-vlan-id
[add | remove]
secondary-vlan-list
no switchport private-vlan mapping
Parameters
•
primary-vlan-id
—The VLAN ID of the primary VLAN.
•
add
secondary-vlan-list
—Specifies one or more secondary VLANs to be
added to the port.
•
remove
secondary-vlan-list
—Specifies one or more secondary VLANs to
be removed from the port.
Default Configuration
No VLAN is configured.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode