Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica

DHCP Server Commands

OL-32830-01 Command Line Interface Reference Guide

290

12

To configure the time duration of the lease for an IP address that is assigned from a 
DHCP server to a DHCP client, use the lease command in DHCP Pool Network 
Configuration mode. To restore the default value, use the no form of this command.

lease 

days

 [

hours

 [

minutes

]] |

 

infinite

no lease

•

days

—Specifies the number of days in the lease.

•

hours

—(Optional) Specifies the number of hours in the lease. A 

days

 value 

must be supplied before configuring an 

hours

 value.

•

minutes

—(Optional) Specifies the number of minutes in the lease. A 

days

 

value and an 

hours

 value must be supplied before configuring a 

minutes

 

value.

•

infinite—Specifies that the duration of the lease is unlimited.

The default lease duration is 1 day.

DHCP Pool Network Configuration mode

The following example shows a 1-day lease.

switchxxxxxx(config-dhcp)# 

The following example shows a one-hour lease.

switchxxxxxx(config-dhcp)#