Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica
Quality of Service (QoS) Commands
761
OL-32830-01 Command Line Interface Reference Guide
39
CoS value 6 is mapped to queue 8
CoS value 7 is mapped to queue 7
The default CoS value mapping to 4 queues is as follows:
CoS value 0 is mapped to queue 1.
CoS value 1 is mapped to queue 1.
CoS value 2 is mapped to queue 2.
CoS value 3 is mapped to queue 3.
CoS value 4 is mapped to queue 3.
CoS value 5 is mapped to queue 4.
CoS value 6 is mapped to queue 4.
CoS value 7 is mapped to queue 4.
Command Mode
Global Configuration mode
User Guidelines
Use this command to distribute traffic to different queues.
Example
The following example maps CoS value 4 and 6 to queue 2.
switchxxxxxx(config)# wrr-queue cos-map
2 4 6
39.18 wrr-queue bandwidth
Use the wrr-queue bandwidth Global Configuration mode command to assign
Weighted Round Robin (WRR) weights to egress queues. The weight ratio
determines the frequency at which the packet scheduler removes packets from
each queue. Use the no form of this command to restore the default configuration.
Weighted Round Robin (WRR) weights to egress queues. The weight ratio
determines the frequency at which the packet scheduler removes packets from
each queue. Use the no form of this command to restore the default configuration.
Syntax
wrr-queue bandwidth
weight1
weight2
...
weighting