Cisco Cisco Web Security Appliance S670 Notas de publicación

To migrate your configuration from physical hardware, use one of the following procedures: 

Upgrade your physical appliance to AsyncOS 8.0. 

Save the configuration file. 

Set up your virtual appliance with AsyncOS 8.0. 

Import the 8.0 configuration file into the virtual appliance. 

If you are running a release earlier than AsyncOS 7.7.0, upgrade to AsyncOS 7.7.0. 

Save the configuration file from AsyncOS 7.7.0. 

Set up your virtual appliance with AsyncOS 7.7.5. 

Import the 7.7.0 configuration file into the virtual appliance. 

Upgrade the virtual appliance to AsyncOS 8.0. 

When you upgrade AsyncOS for Web from the web interface or Command Line Interface (CLI), the 
configuration is saved to file in the /configuration/upgrade directory. You can access the upgrade 
directory using an FTP client. Each configuration file name is appended with the version number, and 
passwords in the configuration file are masked so they are not human readable. 

Cisco does not generally support the backward compatibility of configuration files with previous major 
releases. Minor release support is provided. Configuration files from previous versions may work with 
later releases; however, they may require modification to load. Check with Cisco Customer Support if 
you have any questions about configuration file support.

You must reboot the Web Security appliance after you upgrade AsyncOS for Web.

Perform preupgrade requirements, including updating the RAID controller firmware. 

On the System Administration > Configuration File page, save the XML configuration file off the Web 
Security appliance.