Cisco Cisco Web Security Appliance S390 Notas de publicación
8
Release Notes for Cisco AsyncOS 8.0.0 for Web
8.0
Upgrading AsyncOS for Web
To migrate your configuration from physical hardware, use one of the following procedures:
Upgrade Option 1
Step 1
Upgrade your physical appliance to AsyncOS 8.0.
Step 2
Save the configuration file.
Step 3
Set up your virtual appliance with AsyncOS 8.0.
Step 4
Import the 8.0 configuration file into the virtual appliance.
Upgrade Option 2
Step 1
If you are running a release earlier than AsyncOS 7.7.0, upgrade to AsyncOS 7.7.0.
Step 2
Save the configuration file from AsyncOS 7.7.0.
Step 3
Set up your virtual appliance with AsyncOS 7.7.5.
Step 4
Import the 7.7.0 configuration file into the virtual appliance.
Step 5
Upgrade the virtual appliance to AsyncOS 8.0.
Configuration Files
When you upgrade AsyncOS for Web from the web interface or Command Line Interface (CLI), the
configuration is saved to file in the /configuration/upgrade directory. You can access the upgrade
directory using an FTP client. Each configuration file name is appended with the version number, and
passwords in the configuration file are masked so they are not human readable.
configuration is saved to file in the /configuration/upgrade directory. You can access the upgrade
directory using an FTP client. Each configuration file name is appended with the version number, and
passwords in the configuration file are masked so they are not human readable.
Cisco does not generally support the backward compatibility of configuration files with previous major
releases. Minor release support is provided. Configuration files from previous versions may work with
later releases; however, they may require modification to load. Check with Cisco Customer Support if
you have any questions about configuration file support.
releases. Minor release support is provided. Configuration files from previous versions may work with
later releases; however, they may require modification to load. Check with Cisco Customer Support if
you have any questions about configuration file support.
Post-Upgrade Reboot
You must reboot the Web Security appliance after you upgrade AsyncOS for Web.
Upgrading AsyncOS for Web
Before You Begin
•
Perform preupgrade requirements, including updating the RAID controller firmware.
Step 1
On the System Administration > Configuration File page, save the XML configuration file off the Web
Security appliance.
Security appliance.