Cisco Cisco Web Security Appliance S190 Guía Del Usuario
22-37
AsyncOS 10.0 for Cisco Web Security Appliances User Guide
Chapter 22 Perform System Administration Tasks
Monitoring System Health and Status Using SNMP
MIB Files
MIB files are available from
Use the latest version of each MIB file.
There are multiple MIB files:
•
asyncoswebsecurityappliance-mib.txt — an SNMPv2 compatible description of the Enterprise MIB
for Web Security appliances.
for Web Security appliances.
•
ASYNCOS-MAIL-MIB.txt — an SNMPv2 compatible description of the Enterprise MIB for Email
Security appliances.
Security appliances.
•
IRONPORT-SMI.txt — This “Structure of Management Information” file defines the role of the
asyncoswebsecurityappliance-mib.
asyncoswebsecurityappliance-mib.
This release implements a read-only subset of MIB-II as defined in RFCs 1213 and 1907.
Enabling and Configuring SNMP Monitoring
To configure SNMP to gather system status information for the appliance, use the
snmpconfig
command
in the command-line interface (CLI). After you choose and configure values for an interface, the
appliance responds to SNMPv3 GET requests.
appliance responds to SNMPv3 GET requests.
When you use SNMP monitoring, keep the following points in mind:
•
These version 3 requests must include a matching passphrase.
•
By default, version 1 and 2 requests are rejected.
•
If enabled, version 1 and 2 requests must have a matching community string.
Hardware Objects
Hardware sensors conforming to the Intelligent Platform Management Interface Specification (IPMI)
report information such as temperature, fan speed, and power supply status.
report information such as temperature, fan speed, and power supply status.
To determine the hardware-related objects available for monitoring (for example, the number of fans or
the operating temperature range), see the hardware guide for your appliance model.
the operating temperature range), see the hardware guide for your appliance model.
Related Topics
•
SNMP Traps
SNMP provides the ability to send traps, or notifications, to advise an administration application when one
or more conditions have been met. Traps are network packets that contain data relating to a component of
the system sending the trap. Traps are generated when a condition has been met on the SNMP agent (in this
case, the Cisco Web Security Appliance appliance). After the condition has been met, the SNMP agent
then forms an SNMP packet and sends it to the host running the SNMP management console software.
or more conditions have been met. Traps are network packets that contain data relating to a component of
the system sending the trap. Traps are generated when a condition has been met on the SNMP agent (in this
case, the Cisco Web Security Appliance appliance). After the condition has been met, the SNMP agent
then forms an SNMP packet and sends it to the host running the SNMP management console software.
You can configure SNMP traps (enable or disable specific traps) when you enable SNMP for an
interface.
interface.