Cisco Cisco Content Security Management Appliance M390 Guía Del Usuario
A-3
Cisco IronPort AsyncOS 8.0 for Security Management User Guide
Appendix A IP Interfaces and Accessing the Appliance
Creating IP Interfaces Using the GUI
Procedure
Step 1
Choose Management Appliance > Network > IP Interfaces.
Step 2
Click Add IP Interface.
Step 3
Enter a name for the interface.
Step 4
Select an Ethernet port and enter an IP address.
Step 5
Enter the netmask for the IP address.
Step 6
Enter a hostname for the interface.
Step 7
Select the check box next to each service you want to enable on this IP interface. Change the
corresponding port if necessary.
corresponding port if necessary.
Step 8
Select whether to enable redirecting HTTP to HTTPS for appliance management on the interface.
Step 9
If you are using the Cisco IronPort Spam Quarantine, you can select HTTP or HTTPS or both and specify
the port numbers for each. You can also select whether to redirect HTTP requests to HTTPS. Finally,
you can specify whether the IP interface is the default interface for the Cisco IronPort Spam Quarantine,
and whether to use the hostname as the URL or provide a custom URL.
the port numbers for each. You can also select whether to redirect HTTP requests to HTTPS. Finally,
you can specify whether the IP interface is the default interface for the Cisco IronPort Spam Quarantine,
and whether to use the hostname as the URL or provide a custom URL.
Step 10
Submit and commit your changes.
Accessing the Appliance via FTP
Warning
By disabling services via the Management Appliance > Network > IP Interfaces page or the
interfaceconfig
command, you can disconnect yourself from the GUI or CLI, depending on how you
are connected to the appliance. Do not disable services with this command if you are not able to
reconnect to the appliance using another protocol, the Serial interface, or the default settings on the
Management port.
reconnect to the appliance using another protocol, the Serial interface, or the default settings on the
Management port.
Procedure
Step 1
Use the Management Appliance > Network > IP Interfaces page (or the
interfaceconfig
command) to
enable FTP access for the interface.
In this example, the Management interface is edited to enable FTP access on port 21 (the default port):