Cisco Cisco Agent Desktop 8.0 Guía Del Usuario
CAD Configuration Setup Utility
January 16, 2013
47
Services Configuration
The Services Configuration window only appears during update mode.
If the computer has more than one IP address, select the IP address of the NIC used
to connect to the LAN—it must be accessible by the client desktops.
to connect to the LAN—it must be accessible by the client desktops.
To enable CAD automated updates, select Yes. Automated updates cause Agent
Desktop, Supervisor Desktop, and Desktop Administrator to look for newer versions
every time they start. If one is found, the update process is run automatically.
Desktop, Supervisor Desktop, and Desktop Administrator to look for newer versions
every time they start. If one is found, the update process is run automatically.
To connect to Unified CM, the BIPPA service must have identical user IDs and
passwords configured in this window and in Unified CM. You can complete the fields in
this window before configuring the user in Unified CM. To set up the user ID and
password, see "Creating a Unified CM User" in the Cisco CAD Installation Guide.
passwords configured in this window and in Unified CM. You can complete the fields in
this window before configuring the user in Unified CM. To set up the user ID and
password, see "Creating a Unified CM User" in the Cisco CAD Installation Guide.
NOTE: If you change any of these settings, you must restart all CAD
services to ensure that the change is registered with them properly.
services to ensure that the change is registered with them properly.
Figure 17.
Services Configuration