Cisco Cisco Packet Data Interworking Function (PDIF)
HNB-GW Service Configuration Procedures
DSCP Marking Configuration ▀
HNB-GW Administration Guide, StarOS Release 16 ▄
107
DSCP Marking Configuration
To configure DSCP marking for control and data packet over Iuh and Iu interface for HNB-GW service:
Step 1
Modify HNB-GW service to configure the DSCP marking for SCTP and UDP packets over Iuh interface by applying
the example configuration in the Configuring DSCP Marking over Iuh Interface section.
the example configuration in the Configuring DSCP Marking over Iuh Interface section.
Step 2
Modify HNB-GW service to configure the DSCP marking for UDP packets over Iu interface by applying the example
configuration in the Configuring DSCP Marking for Data Packet over Iu Interface section.
configuration in the Configuring DSCP Marking for Data Packet over Iu Interface section.
Step 3
Modify SGSN-Global configuration to create the DSCP template for SCTP packets and modify PSP Instance to
associate this DSCP template for downlink packets with particular PSP intance by applying the example configuration
in the Creating and Associating DSCP Template for Control Packets over Iu Interface section.
associate this DSCP template for downlink packets with particular PSP intance by applying the example configuration
in the Creating and Associating DSCP Template for Control Packets over Iu Interface section.
Step 4
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
command
save configuration
. For additional information on how to verify and save configuration files, refer to the
System Administration Guide and the Command Line Interface Reference.
Configuring DSCP Marking over Iuh Interface
To configure the DSCP marking over Iuh interface for SCTP and UDP packets modify the HNB-GW service by
applying the following example configuration:
applying the following example configuration:
configure
context <vpn_ctxt_name>
hnbgw-service <hnbgw_svc_name> -noconfirm
ip iuh-qos-dscp protocol { sctp | udp } payload { all | gtpu | rtcp | rtp } { af11
| af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs1 |
cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef }
| af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs1 |
cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef }
end
Notes:
<
vpn_ctxt_name
> is name of the source context in which HNB-GW service is configured.
<
hnbgw_svc_name
> is name of the HNB-GW service in which Open Access mode support is to be configured.
For more commands and keyword options, refer Command Line Interface Reference.
Configuring DSCP Marking for Data Packet over Iu Interface
To configure the DSCP marking over Iu interface for UDP packets modify the HNB-GW service by applying the
following example configuration:
following example configuration:
configure
context <vpn_ctxt_name>